An igniter that clicks all night, a coil that glows on one side only, a glass top with a fresh crack: these are the calls we take every day. One call connects you with a licensed, insured independent cooktop pro around Rolla.
We do not send just anyone with a toolbox. The pros in our network work on cooktops week in and week out, and they know the difference between a bad spark module and a wet burner head.
Every contractor we connect you with runs their own licensed, insured business. Gas work on a range touches a supply line, so ask the pro about their gas certification for your area before work starts.
After testing, the technician writes out a quote that names the part and the labor before anything gets replaced. You decide whether to go ahead.
We work the local schedule while you are still on the phone. Same-day visits happen often when a nearby pro has an open slot, and the dispatcher pins down a time window before you go.
Stove pros carry a manometer for gas pressure, a multimeter for switches and elements, spare igniters, burner orifices and the service manual for your model. That kit is what turns a guess into a real diagnosis.
We hear from people with forty-year-old coil ranges and from people with brand-new induction cooktops. Different machines, same goal: get the burners working and safe again, without paying for guesswork.
Tell the dispatcher the brand, whether it runs on natural gas, propane or electricity, and exactly which burner misbehaves. That short description helps the pro bring the right igniter, element or valve on the first trip.
These are the cooktop faults that fill our phone log. If yours is not listed, call anyway; the dispatcher will match you with a pro who knows that model.
Constant clicking with the knob turned off often means a spill soaked the switch harness under the knobs. No spark at all on every burner points the pro toward the spark module or its power feed.
If the flame looks orange, ragged or jumps off the burner, something is off with air or gas delivery. The independent pro cleans the ports and orifice, confirms the cap sits flat, and measures manifold pressure against the spec on the tech sheet.
A coil that only heats on high, or never heats at all, gets tested with a multimeter at the element, the burner block and the infinite switch. Burnt receptacles are common on older ranges and are a fire risk worth fixing right away.
Glass ceramic cooktops hide radiant elements and a limiter under the surface. A zone that stays dark, a hot-surface light that never goes out, or a cracked or crazed top all need a pro, and a cracked top should not be used until it is replaced.
Induction cooktops throw error codes when a pan is not magnetic, the cooling fan stalls, or the power board fails. The pro reads the code, tests cookware compatibility with a magnet, and checks the fan and board before any part goes in.
A knob that spins without turning the valve, a valve stem that sticks, or a move from natural gas to propane all land in this group. The tech can swap orifices for the new fuel, adjust the regulator, and fit an anti-tip bracket on slide-in and freestanding units.
This table is not a substitute for a diagnosis, but it helps you describe the problem clearly to our dispatcher.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
The process is short on purpose. You call, a local pro shows up, you see a quote, and the burner gets tested in front of you.
One phone call starts everything. Tell us what the cooktop is doing, and we look for a nearby pro with time on the schedule.
The technician drives to your home with common igniters, coil elements, switches and orifices on the truck. You get the arrival window on the call, and callers frequently see a pro the same day when someone nearby is available.
The pro tests the burner circuit or gas train with a multimeter or manometer, explains what failed, and writes an upfront quote. Nothing gets replaced until you say yes.
Once the part is in, the technician lights or powers every burner, checks flame or heat on each setting, and leak-tests any gas fitting that was opened.
A careful pro pulls the cooktop or lifts the top before guessing. On gas units they check pressure at the manifold; on electric units they read voltage at the switch and resistance at the element. That is how a cheap igniter does not turn into an expensive control board by mistake.
Call now and we will look for a local stove pro with an opening.
Our front left burner clicked for two days straight, even with the knob off. The tech found that a pot of pasta water had boiled over into the switch harness. He dried it, replaced one valve switch, and the clicking stopped. The quote was written out before he started.
A tenant called me about a coil burner that sparked when it was plugged in. The pro found the burner block had cooked itself, swapped the block and the element, and explained why both had to go together.
The induction top flashed a code every time I boiled water. The pro ruled out my cookware, then found a seized cooling fan under the glass. Simple fix once someone actually opened it up.
We moved into a house with propane and brought our natural gas range. The dispatcher found a pro who converted it the next morning, swapped every orifice, flipped the regulator and checked the flames burner by burner. He also put in the anti-tip bracket the old owners never installed.
The spark module fires whenever a switch tells it to. A spill, a cracked igniter or a failed switch behind the knob can keep that signal on, which is why the clicking never stops. A pro can test each switch and replace the bad one.
A yellow or orange flame means incomplete combustion, which can create soot and carbon monoxide. Common causes are clogged ports, a cap that sits crooked, or the wrong orifice for your fuel. Stop using that burner and have a pro check it.
Cut the power or the gas first. On electric ranges, flip the breaker; on gas ranges, close the shutoff behind the unit. Then call and we will route a pro who can replace the switch or valve that failed.
A crack lets liquid reach live parts, so the glass has to be replaced. The technician quotes the new top in writing, and most models allow the glass to be swapped without replacing the whole range.
Most gas ranges and cooktops can be converted with an LP kit from the manufacturer. The pro swaps the burner orifices, adjusts the pressure regulator, and checks every flame afterward.
Induction only works with magnetic cookware. If a magnet does not stick firmly to the bottom of the pan, the zone will not heat. If your pans pass the magnet test, the technician looks at the coil, sensor and power board next.
Our referral line covers homes, condos, apartments and rental properties in Rolla and the nearby neighborhoods and suburbs. The independent pros we connect you with drive to you, and most carry common igniters, coil elements and switches on the truck.
If you manage rentals, mention the unit and the tenant contact when you call. The dispatcher passes it to the pro so the visit goes smoothly.
One call to our dispatch line connects you with a local stove pro.
